Zhufeng ACI Ball Grinder Power Saver DLT-QF11
【Power Range: 45KW ~ 132KW】
【Energy-saving efficiency: 10% to 40%】
Wet ball mill (ceramic enterprises) is based on drum diameter and process requirements and production to selection and configuration, which includes motor (motive force) reducer, hydraulic coupling, auxiliary motor, brake coils, belts, pulleys, rollers and so on. The original control is to run at a constant speed, and only through experience and test to decide what to do product how much time, that is, the ball, while starting a large force, it is difficult to start. After a lot of our company's test and data summary, developed for the ball mill ACI Ball Power Saver, a variety of power section of the series DLT-QM and QM11 series.
Four aspects of energy-saving:
(1) Power Saver uses soft-start function to reduce 4-7 times the starting current.
(2) Power Saver power factor up to 99% or more, the original motor power factor of 80% or less.
(3) Because different products need different speed, and the power and speed of the quadratic is proportional to, we can set the different time and different products required speed, the customer can freely set or select (through the microcomputer processor to fulfill).
(4) We have automatic real-time tracking of the motor running current, thus adjusting the corresponding output voltage and current, to achieve the best economic point of operation.
According to the above four points, the integrated energy-saving effect can reach more than 10%, an average of up to 15%, the effect is very significant. It is different from the general inverter, soft starter, power factor compensation, which is the organic combination of the three, and to overcome the difficulties in starting the perfect combination of factors such as the modern enterprise of choice for ceramic energy-saving products.
Functions and features:
1.Anti-static, anti-surge, lightning;
1.ACI ball mill dedicated Power Saver, has a unique dynamic energy-saving features, energy-saving rate of 10% to 35%.
2.Waterproof, dust-proof, anti-corrosion. After the installation of special power Saver ball mill into the real start soft start, the impact of ball mill by the start greatly reduced, the ball mill belt and gear life is greatly improved.
3.The use of the machine, the impact of ball mill start current and operating current are reduced, it will not cause the power grid voltage fluctuations and grid voltage to reduce the resulting power consumption of other electrical equipment tripping and failure of the phenomenon.
4.ACI ball mill dedicated Power Saver is with a perfect overload, overcurrent, short-circuit and grounding protection.
5.It’s easy to set the milling time and automatic shutdown time, you can also easily choose grinding time.
6.Low investment and high returns. All investment can be recovered within 5-12 months by saving electricity.
ACI ball mill dedicated Power Saver is based on the frequency of special improvements and software upgrades, professional development and production for the ball mill dedicated ball mill Power Saver, which is different from the general inverters. Ceramic factory in the installation ACI ball mill start-up current to start the ball mill easy starting current can be controlled below the rated current. There
Contact Person: benchtest